Hình thang vít/bộ phận liên quan cho hình thang vít
Với hồ sơ răng hình thang, nó là một loại truyền động vít. Chuyển động và năng lượng được truyền qua sự gắn kết của hạt và vít, chuyển đổi chuyển động quay thành chuyển động tuyến tính. Ốc vít hình thang có hiệu suất truyền cao, định vị chính xác và khả năng chịu tải cao.



Installation Steps and Maintenance
(1) Installation of Support Components
① Insert the trapezoidal screw into the fixed side support component.
② Temporarily tighten the accompanying fastening nut after inserting the collar. Tighten it to 1/3 of the tightening torque. At this time, the support side support component must be inserted into the support side, fixed, and then work can be carried out.
③ Tighten the nut while rotating the screw shaft to ensure smooth overall operation.
④ Once the overall operation is smooth, fully fix it with the tightening torque.
(2) Installation of Nuts for Screw Rods
① Chamfering of the Support Base
To increase the strength of the flange root of the trapezoidal screw, it is necessary to process the corners into an R shape. Therefore, it is necessary to chamfer the inner corners of the support base.
(3) Recommended Installation Direction
When using the screw rod to convey heavy objects in the vertical direction, it is safe to install the trapezoidal screw as shown in the figure below. This can provide support on the installation hole to prevent the moving object from falling, even if the trapezoidal screw breaks due to overload or impact.
Screw rod Shaft rotation (axial fixation) Chamfer Diameter
(1) Installation Example
The following figure shows an example of trapezoidal screw installation. When installing the trapezoidal screw, it is necessary to fully ensure the axial fixation strength.
Lubrication
Trapezoidal screws are not coated with lubricating oil or grease when delivered, so it is necessary to provide an appropriate amount of lubricating oil or grease after installing the bearing.


